Gas line work demands a licensed plumber — not a handyman, not a general contractor. Whether you need a gas leak repaired, a new gas line installed for a stove or generator, or a safety inspection of your home’s gas system, A Clear Choice Plumbing and Heating provides expert gas line services in Englewood CO with full Colorado licensing, proper permits, and inspections that give you documented peace of mind.
⚠️ SAFETY FIRST: If you smell gas in your home, leave immediately and call 911. Do not use light switches, phones, or any electrical device. Call us after first responders have cleared the area.
Natural gas powers a significant portion of Englewood’s residential appliances — furnaces, boilers, water heaters, ranges, dryers, fireplaces, and outdoor grills. The gas lines supplying these appliances age alongside the homes they serve, and older black iron pipe systems common in Englewood’s pre-1980 housing stock can develop corrosion, loose fittings, and joint failures over time.
At A Clear Choice, we are licensed to perform gas line work in Colorado — including repair of existing lines, installation of new branch lines to appliances, gas line upsizing for high-BTU appliances like tankless water heaters, pressure testing and leak detection, and full system inspections. Every gas line project is permitted and inspected through the City of Englewood, ensuring your system meets current Colorado code and your installation is fully documented.
If you suspect a gas leak — even a small one — it requires immediate professional attention. We use electronic gas leak detection equipment to precisely locate leaks in supply lines, at appliance connections, and at shutoff valves. Once located, we repair the affected section, pressure-test the system to confirm integrity, and document the repair for your records.
Adding a gas appliance — a range, gas dryer, outdoor grill, fireplace insert, generator, or pool heater — requires a new branch line run from your existing gas supply. We design and install new gas lines sized appropriately for the appliance, with proper shutoff valves, code-compliant materials, and full pressure testing before the line is put into service.
High-BTU appliances like tankless water heaters and commercial-style ranges often require a larger gas supply line than what exists in many Englewood homes. We assess the full gas system and upsize the relevant sections to support the new appliance’s demand without starving other connected appliances.
Converting a kitchen from electric to gas, or relocating a gas range, requires a properly sized and permitted gas branch line with an accessible shutoff valve behind or beneath the range. This is one of our most common gas line installation requests in Englewood — we handle it from the branch tap to the final connection and inspection.
If you suspect a gas leak — even a small one — it requires immediate professional attention. We use electronic gas leak detection equipment to precisely locate leaks in supply lines, at appliance connections, and at shutoff valves. Once located, we repair the affected section, pressure-test the system to confirm integrity, and document the repair for your records.
Gas leak detection and repair
New gas line installation — all appliance types
Gas line for stove, range, and dryer installation
Gas line upsizing for high-BTU appliances
Outdoor gas line installation — grills, fire pits, pool heaters
Gas generator connection
Gas fireplace line installation and repair
Gas shutoff valve installation and replacement
Gas line pressure testing and leak certification
Gas system safety inspection and written report
Permit and city inspection management for all gas work
Emergency gas line repair
Licensed gas line plumbers — permitted, inspected, and fully documented.
Not every plumber is licensed for gas line installation and repair in Colorado. We carry the required state licensing for all gas line work.
We use calibrated electronic gas detection equipment — not soapy water and guesswork — to precisely locate leaks in supply lines and connections.
We provide a complete quote — materials, labor, permit — before starting any gas line work. No surprise additions discovered after the trench is dug or the wall is opened.
Gas line work in Englewood requires a permit. We submit the application, coordinate the city inspection, and provide you with the signed inspection report.
We know the older black iron pipe systems common in Englewood's pre-1980 homes, the typical sizing of existing supply lines, and what upsizing is required for modern high-BTU appliances
Over 10 years serving Englewood. Our gas line work is code-compliant, documented, and backed by our workmanship warranty.
We provide gas line repair, installation, and inspection throughout Englewood:
We also serve Sheridan, Littleton, Greenwood Village, and the Denver University area.
Leave the house immediately. Do not flip any light switches, use your phone inside, or do anything that could create a spark. Once outside, call 911 and Xcel Energy’s gas emergency line. Do not re-enter until first responders have inspected and cleared the property. After the area is declared safe, call us — we will locate the leak source with electronic detection equipment, repair it, pressure-test the line, and document the repair for your records.
Gas line repair and installation must be performed by a licensed plumber — not a general handyman or contractor. In Colorado, working on gas lines requires a specific plumbing license and the work must be permitted and inspected by the local authority. A Clear Choice is licensed, insured, and performs all gas line work under the required permits in Englewood.
Gas line installation cost in Englewood depends on the length of line needed, the pipe size, and the scope of work. A short branch line for a kitchen range typically runs $300–$700. Longer runs, outdoor lines, or projects requiring gas service upsizing can run $800–$2,500. We provide a detailed written quote covering materials, labor, and permit cost before any work begins.
Yes. All gas line installation and repair work in Englewood requires a permit and city inspection. Unpermitted gas work is a significant liability — it can void homeowner’s insurance coverage for related incidents and create problems during property sales when the unpermitted work is discovered during inspection. We handle permit submission and city inspection coordination for all gas line projects.
Yes — this is one of our most common gas line requests. Converting from electric to gas cooking requires a new branch line from the nearest gas supply point, sized for the range’s BTU rating, with a shutoff valve accessible from the range location. We design, install, permit, and inspect the complete line. We can also advise on whether your existing gas service has adequate capacity for the additional load.
The most obvious sign is the distinctive rotten-egg odor of mercaptan — the odorant added to natural gas for safety. Other signs include: a hissing or whistling sound near gas lines or appliances, dead vegetation in a specific area of your yard (indicating an underground line leak), bubbling in standing water near gas lines, or physical symptoms like headaches and dizziness when indoors. If you notice any of these, treat it as a potential emergency and follow the evacuation steps above.
Whether you need a gas leak repaired, a new gas line run for an appliance, or a safety inspection of your home’s gas system — A Clear Choice Plumbing and Heating provides the licensed, permitted gas line work Englewood homeowners can rely on.
Call us or submit a quote request online and we will respond promptly.
